Chemineering: Design

Showing posts with label Design. Show all posts

Friday, February 24, 2017

Top five courses for entry level Process Engineers

Process Engineering is much complex discipline in the field of Chemical Engineering. This field will challenge you like anything. While operating the process plant you may encounter with plethora of problems that need immediate attention, without which the result won't be pleasing. As a young engineer coming straight out of college you will have the enthusiasm and energy to prove your self in the process field. This kind of attitude is good but you are bound to do several mistakes in this period. Without knowing where to start and what to learn in the industry is the biggest dilemma that many of us are facing now a days. In order to proceed in this process field you should equip yourself with some special skills. These skills can be learn through several courses that are available to all now a days.

Here are the top 5 courses for entry level process engineers that are helpful for career progression.

1. Process Simulation Software Course

Process simulation software like Aspen Hysys, CHEMCAD,PRO II, HTRI etc., are very helpful in solving real time problems in process industry. With the help of these simulation software you can do

Optimization of a given process
Equipment sizing
Cost estimation
Process modelling
Estimation of mixture properties at various given conditions like P,V,T etc.,

Image Source : Google/AspenTech

The advantage of these simulation software is, they will calculate the real values rather than ideal values by using various property methods. Process Engineers who are familiar with this kind of simulation software will have edge in the interviews conducted for experienced process engineer jobs.
Here are some of the institutes that are offering Process Simulation software course in India.

Chemsys - Chennai

Dimensional Academy - Mumbai, Chennai

EQUINOX - Pune

AspenTech Training Center

2. Health, Safety and Environment Course

Now a days Health, Safety and Environment (HSE) courses are available everywhere (Online/Offline) to learn. These HSE courses will boost your career in Chemical Process Industry. The main objective of these courses will be providing various methods and techniques to run the process industry cleaner and safer. At the same time this course will educate the participants to identify and manage any sort of problem that occurred during the operation. Here you will be exposed to lot of case studies, after all learning from failures is the best learning. Don't forget to get a certificate if you want to pursue these courses.

Here are some HSEcourse qualifications that are available to learn

NEBOSH - National Examination Board in Occupational Safety and Health UK

National Safety Council, USA

Chartered Institute of Environmental Health, UK

In India you can find HSE courses at

HSEI Institute - Kerla, New Delhi

NPTEL

Indian Institute of Environment, Health & Safety Management (IIEHSM)

NIST Institute

NIFS - National Institute of Fire Engineering and Safety Management

3. Process Engineering Course

Chemical Engineering will give you a glimpse of what is what and whats happening in a process industry. But the real challenge is designing a process industry itself. It involves sizing of various equipment like vessels, reactors, heat exchangers, absorbers, distillation columns, piping, pumps etc., Designing of relief valves, knock out vessels, decanters, two phase line sizing, project organization and various types of diagrams like PFD, PID is not common thing and we don't learn those things in our college life. So in order to be a complete process design engineer its better to pursue this course. Following are some of the institutes that are offering process engineering course in India.

MIT Skills - Pune

Chemsys - Chennai

Mecci Engineers - Noida

Smart Brains - Hyderabad, Noida, Pune, Vadodara

Magnus Global Tech Education - Bangalore

Some of the institutes offer placement assistance after successful completion of the course. Please do some research before enrolling in a particular institute.

4. Microsoft Excel for Engineers Course

Microsoft Excel is a not just a application to fill some tabular columns and generating some charts based on the data, in real process world it is more than that. In a process industry you will deal with many kind of reports like Daily production report, Steam balance report, MIS report, downtime report, vendor evaluation etc., Also you will encounter with various calculations which are to be done quickly yet repeatedly. This can be better handled in Microsoft Excel. In Microsoft Excel you can do the complex calculations by using various mathematical, accounting functions. Also if you master Macros in excel you can literally do anything in Excel if you give sufficient data to Excel for processing. You can learn this course either online or offline. here are some of the best resources which I came across the internet for learning Microsoft Excel.

Chandoo.org

Lynda.com Tutorials

Youtube

Udemy

Engineers-Excel.com

Lot of resources are available for learning Microsoft Excel in online mode, this will save your time and help in easy access of the content.

5. Part Time Business Management Course

This course is especially for those who have time constraint to do full time management degree. Trust me, Process engineers with a management degree are hot cakes in job market and they have higher chances of elevation in career. Those who don't have sufficient time to engage in a full time course should opt for a part time or distance course, as this course will make you a key person from process as well as corporate side in a company. You can even do an executive MBA course after attaining sufficient experience in your job, the duration of this course is generally one year. Following links will provide you the information of some institutes that are offering part time courses in business management.

Hope the information is helpful to you, please do like the page and subscribe for RSS feed.

Tuesday, May 12, 2015

Pressure drop in pipe lines and fittings. Part-2

Pressure drop due to valves and fittings

In the earlier post, tutorial goes around pressure drop in pipe lines. Pressure drop arises due to skin friction and form friction. Non separated boundary layers cause skin friction whereas separated boundary layers cause form friction. In plain pipe pressure drop is due to skin friction. But in a pipe line with valves and fittings pressure drop is mainly due to form friction. the pipe lines may be connected to equipment and again pressure drop will be there in that equipment. This tutorial is restricted to pressure drop in valves and fittings only.

How to design a P&ID? Part-3

Earlier two parts of designing a P&ID were from process perspective of a P&ID. Now in this present part we will deal with the instrument aspects of a P&ID. Some of the most common instruments which we are using in process industry are transmitters, gauges, indicators, control valves, on off valves etc. The parameters which we are interested may be flow, temperature, pressure, concentration etc. Before going to discuss further about instrumentation part in P&ID it is better to get familiarized with the instrumentation terms. Let’s get started

How to design a P&ID? Part-2

Pipe line representation

Pipe lines should be shown with an orthogonal arrow mark i.e, You should not mention the arrow mark in the middle of line. Always represent the arrow at the pipe right angles in the drawing.

How to design a P&ID ? Part-1

Designing a P&ID Part-1

In this part we will see the legend and symbols using in P&ID now days. Please note that the legend and symbols may vary from one process designer to another and the reader should understand that. Following sections will give a brief idea about P&ID representation.

Pipe line number

X” – AB – CDEF – GHI – J

X = Pipe line size.

AB = Service Code (Arbitrary for Chlorine I can take as CL).

CD = Last two digits of drawing number.

EF = Line sequence number.

GHI = Line material of construction.

J = Insulation thickness.

Example:

6” – CL – 0102 – CS – 40H

The above line is 6 inch pipe in chlorine service present in a drawing whose number ends with 01 and it is second such line in the drawing. Also the material of construction is Carbon Steel with 40mm thick hot insulation.

Service code, pipe material, insulation notation varies from one company to another. Some companies also use color coding to easily differentiate the lines in colored P&ID.

Area numbers

In order to easily review a section in P&ID it is always better to allot specific number for that particular unit. Consider the following example.

31: Raw material processing section.

32: Reacting section.

33: Purification section.

34: Storage/Packing/Drumming section.

So if I say, I am using a roll crusher in 31 section, I am actually referring roll crusher present in raw material processing section.

Equipment tag format

In a process industry we use lot of process equipments (pumps, vessels, exchangers, reactors etc,). Calling a pump with its true name like “Propylene glycol distillation column bottom pump” may create confusion. Also it is cumbersome enough to mention with its original name all times. So we use a notation which conveys the equipment name tidy. Generally the equipment tag name will be of the form

AN – EQ – SN

AN: Area Number

EQ: Equipment type code

SN: Sequence Number

For Example

03 C 3204

The above tag name corresponds to a fourth (04) column (C) in reacting section (32), whose area number is three (03).

Again some companies follow three digit tag number and some four digits. It is purely based on the company discretion. For equipments we can use the following notation.

Code	Equipment
A	Agitator
C	Distillation columns, absorption columns, scrubber, packed columns
D	Drums
E	Exchangers
EJ	Ejectors
F	Filter
G	Decanters, Centrifuges
H	Hydro cyclones
J	Hoppers, Bunkers
K	Compressors, Blowers
L	Vacuum pumps
M	Mixers
P	Pumps
R	Reactor
SM	Static Mixers
T	Tanks
V	Vessels

Thursday, February 5, 2015

What is a P&ID?

What is P&ID?

A P&ID or a piping and instrumentation diagram is nothing but a diagram which depicts all the pipe lines and instruments connecting various process equipment and vessels. Here in these diagrams we can see the pipe line size, service, material of construction and the line number from piping point of view. Also the number of valves and their type using for a particular project are finalized based on the P&ID. For different types of process equipment and fittings we use various symbols to differentiate their purpose. Certain operating conditions like temperature and pressure are also represented near critical areas like pressure safety valves. The above discussion revolves around the process engineering.

Coming to the instrumentation part, just think about how you will measure the flow, temperature, pressure etc., in a pipe line which is flowing at higher temperature and pressure. You can’t take a chance to measure all the parameters by your hand 24*7 and report to DCS (Distributed control system) that’s funny right. That is where you need the help of instruments like transmitters, indicators, recorders, alarms etc., if you want to know the process parameters in various places of the plant you need to mount these instruments at the respective areas. Some of them may be locally displaying instruments and some may send the parameter details to DCS. You need to show all the instruments in the P&ID with various symbols and notations for local, DCS instruments.

P&ID diagrams also embody the control mechanisms involved in the process. For example if a low level in a vessel should close the discharge line from that vessel, the level transmitter in that vessel should send a signal to the control valve in the vessel discharge line. This can be easily represented by the following drawing.

Another aspect of P&ID is the interlock representation. Interlocks are very critical and vital for the safe operation of the process plant. The open loops and closed loops look after the normal operation of the plant whereas the sequence and logic look after the emergency shutdown functions. These interlocks are also represented in the P&ID. For tutorials on P&ID development keep watching the site www.chemineering.blogspot.com.

Saturday, November 1, 2014

Excel Tutorial - 1 : Mass balance calculation using Microsoft Excel

We know that out there in this free information world, lot of soft-wares are available which ease the complexity of work. What if we can design our own mini super ninja software ( actually Excel files) to reduce our repetitive actions while calculating . Lets get started how to do simple calculations in excel.

In this tutorial neutralization of Sulphuric acid ( H2SO4 ) by Sodium hydroxide ( NaOH )was considered. Go through the problem statement given in the below image.

Chemineering.blogspot.com Excel tutorial

At first mention the Chemical reaction in one of the cells (A1 or B5 etc.,). Mention the molecular weights separately in a cell. This is important to put the value in a single cell ( L6 for H2O, L7 for NaOH, L8 for H2SO4, L9 for Na2SO4) it should not contain any alphabets. If you enter alphabets in the molecular weights column it will result in error.
Now we have given the H2SO4 quantity that should be neutralized. Put this value in a separate cell (D11) and convert it in to moles by dividing the mass with molecular weight mentioned in L8 cell.

Now use this moles and multiply this moles with 2 , as 1 mole of H2SO4 requires 2 moles of NaOH for Neutralization which would result in formation of 1 mole of Na2SO4 and 2 moles of H2O.

Multiply the moles by molecular weight in cell E17 to get the mass of NaOH required for neutralization.

Similarly do it for H2O & Na2SO4

Mass used for reaction should be equal to mass produced in the reaction.

Please feel free to put up your doubts and queries below.

To download the Excel file click the link

Mass Balance

Tuesday, August 19, 2014

Types of Chemical engineering drawings - BFD, PFD, P&ID

The terms flow sheet and flow diagrams are often used in engineering and design applications. But this is not the accurate way to describe the process drawings. This post will give a glimpse about the types of process drawings.

Basically there are three types of process diagrams in chemical engineering context.

BFD - Block Flow Diagrams.
PFD - Process Flow Diagrams.
P&ID - Piping and Instrumentation Diagrams.

In a brief BFD represents entire process in a single sheet, where as in PFD you can find some detailed information like plant operating conditions, process flow. It uses symbols to represent the equipment. P&IDs provide detail information when compared to above two drawings. They use standard nomenclature, symbols, and tag numbers to fully describe the process.

These drawings are very useful as they convey the right amount of process information as needed during various stages of bidding, engineering design, procurement, construction, operating & decommissioning phases of the process.

BFD-Block Flow Diagram

Block Flow diagram by Chemineering.blogspot.com

A BFD has the ability to represent the complete process on a little more than a single sheet. It contains mainly text enclosed by boxes, interconnecting lines with flow arrows. In some BFDs mass flow rates may be mentioned so as to describe the material balance over the entire plant.

PFD-Process Flow Diagram

Process Flow diagram by Chemineering.blogspot.com

PFDs contain more information than the block flow diagrams from which they are derived. They show more detail about major equipment, subsystems and the flow of product between them. A typical PFD contains equipment symbols connected by process lines where temperature and pressure information are shown on the line itself. You can easily refer the properties of a particular stream through stream number. For designing a P&ID, equipment layout PFD is mandatory.

P&ID-Piping and Instrumentation Diagram

Piping and instrumentation diagram by Chemineering.blogspot.com

P&IDs carry a lot of information to define the process. Derived from PFD it is the best way of accurately documenting the operation of a process. P&ID takes the conceptual aspects of PFD and expand them by adding

Detailed symbols.
Detailed equipment information.
Equipment order and process sequence.
Process and utility piping.
Process flow direction.
Major and minor bypass lines.
Line numbers, Pipe spec, Pipe size.
Isolation and shut off valves.
Instrumentation controls.
Types of process component connections.

A P&ID can be best understood with the help of a legend sheet given by the P&ID developer. Legend sheet contains information regarding the nomenclature, tag philosophy, symbols, a lot more. Download the PDF files to know more about drawings and legend sheet.

For detail information on BFD, PFD and P&IDs download the following PDF files.

Download PDF file for Piping and symbols

Download PDF file for BFD, PFD, P&ID

Saturday, July 27, 2013

Career boosting short term courses for Chemical Engineers

Like Autocad for Civil and Mechanical Engineering students, Chemical Engineers have a number of soft wares (Simulators) to work with. This gives hands on experience to the budding Chemical Engineers. These simulators give practical approach to the real life Chemical Engineering Problems in a process i.e., in a industry. So why are you waiting ?

Join Career boosting Short Courses!

- Process Simulation & Modeling Aspen Hysys Basic
- Process Simulation & Modeling Aspen Hysys Advance
- Process Design Engineering
- Advance Excel
- Supply Chain Management
- Interior Designing
- Architecture Designing
- Autocad 2D/3D
- Awareness, Implementation & Internal Auditing to IMS (ISO 9001, ISO 14001 & OHSAS 18001)
- Virtualization for Beginners
- Installing and Managing Windows Server 2012
- Introduction to Active Directory Domain Services
- Ms Project
- Primavera
- Total Productive Management
- Energy Audit & Conservation
- PFD & P&ID Development Course
- Project Management & Many Others
OMESOL (Octagon Management & Engineering Solutions) [EPC] is a high quality technical consulting firm. They are recognized experts in areas such as design engineering, project management,supply chain management, plant operations, process safety, feasibility studies and technology selection.

OMESOL bring this expertise to their training courses in the form of high quality trainers who combine technical knowledge, hands on experience and the ability to deliver material effectively. This means that you will receive training at the very highest quality from recognized experts.

OMESOL have an excellent track record of delivering first class courses and always meet the expectations of their Clients.

For registration and further detail, please contact:

E-mail: omesoleducation@gmail.com, unova2k12@gmail.com
Fb Page: www.facebook.com/omesoleducation
Web: www.omesol.com

Chemineering

Pages